Just a short video of all the guys over the year or so weve been quadding,
- PROJECTS DT175 1976 Restoration Part 2
- PROJECTS DT175 1976 restoration
- PROJECTS CB900f 1981 restoration
- PROJECTS New projects!!! Yamaha FJ1200
- PROJECTS 1975 Suzuki GT250m
Tagged: ‘Video’
One Year On The Movie
Wednesday, May 12th, 2010Yamaha Blaster Crash Flip
Thursday, May 6th, 2010Yup, thats one way to get off your quad…
Lord ShugTech Lightsabre Video
Monday, March 1st, 2010Marty G messing about in adobe after effects, gave me a nice little lightsabre, Was a fishing rod to start off with.
(more…)
Quad Mash Up Video
Saturday, March 14th, 2009Just messing around with Adobe Premier Cs4.
(more…)
Quad Day out Blaney 50 Ram 100 KLF 300 QuadZilla 100
Wednesday, January 7th, 2009After 2 weeks of planning and preparation the day was upon us,
“The Quad Day Out“
We had four quads with us on the day, these are listed below,
Near Miss – Inverclyde MX Club
Thursday, August 7th, 2008This was a near miss between the Quad and bike as they race to the corner were the bike slightly moves in front of the quad causing it to catch the back wheel of the bike nearly throwing him off it..
video after the break
(more…)
Camshaft Installation Video – Engine Building Car Repair
Saturday, July 19th, 2008Now that you’re block is ready, onto the “Final Assembly” section of the video and installing your camshaft. We recommend Crane Cams.
You will need all of your cam bearings installed first. You will need moly lube on the distributor drive gear and all of the lobes of your cam. To avoid a mess only do one section of lobes at a time and rest the cam on a journal to lube the next section. It should be freely rotating after installation.
By: SHUGGYBOY
By: JACQUES
By: shuggyboy
By: JACQUES
By: Bruno Nichol